MTL2313 TRIP AMPLIFIER general purpose.

 

The MTL2313 accepts a standard high-level dc signal of 0/20 mA, 0/5V or 0/0.5V from any circuit in a hazardous area, and is

particularly suitable for monitoring the output from a 2-wire transmitter. Since the unit drops less than 0.5V at 20mA across its

input terminals (which are certified as ‘non-energy-storing’ in Europe and regarded as ‘non-voltage-producing’ in the USA) it can be connected into almost any 4/20mA IS loop without causing this to run out of volts or need further attention by the certifying authorities. The unit operates down to zero input current, hence the low alarm can be set to detect a broken cable. On-site alarm setting is carried out simply with a calibrated voltage or current generator.

 

MTL2000 series

Product CodeDescription

MTL2210B  Switch operated relay ~ 1-channel

MTL2211  Switch operated relay ~ 2-channel 

MTL2213  Switch/proximity detector relay ~ 3-channel 

MTL2215  Switch operated relay ~ IS output

MTL2220  Earth-leakage detector 

MTL2241  Solenoid/alarm driver ~ 1-channel 

MTL2242  Solenoid/alarm driver ~ 4-channel

MTL2313  Trip amplifier ~ general purpose

MTL2314  THC trip amplifier

MTL2315  RTD trip amplifier

MTL2316  Bonding integrity monitor 

MTL2441B  4/20mA Repeater power supply

MTL2442B  4/20mA Isolating driver